Notify me when the price drops
We will email you if we find a lower price on this product!
The silicon rubber heater is mainly composed of nickel chromium alloy electric heating wire and high temperature silicon rubber insulation layer. Silicone rubber high temperature insulation layer is made of silicone rubber and glass fiber cloth composite and into a thin sheet (1.5mm), silicone rubber heater has a good flexibility.
⭐Features:
✅Heated Engine: Help you start car quickly. In cold winter, use silicone heating pad to heat the engine and transmission before starting the car, reduce the consistency of the oil to keep the oil as a thin liquid, thus better lubricating the engine and reducing wear and tear, extending the life of the engine and transmission and starting the car quickly.
✅Replaces Block Heaters: Magnets do not work on aluminum oil pan, which is what most cars have. Oil pan heaters are suitable for both cast iron and aluminum engine oil pans.Economical and convenient solution.
✅High Quality Material: Made of high quality silicone, waterproof and oil-proof, the waterproof design of the silicone and power cord connection reduces the risk of short circuit. The hotter the upgraded silicone is the stronger the adhesion. -The insulation layer of the silicone rubber heating plate is composed of silicon rubber and glass fiber cloth, which has high insulation performance and a breakdown voltage of 20 ~ 50KV / mm.
-The double-sided adhesive on the back can be directly attached to the product to be heated. The maximum resistance is 200 ° and it does not fall off.
✅Easy to Install: Clean and dry the flat surface of the device, peel off the paper backing and apply the oil pan heater, using magnets/adhesives can extend the adhesion time (magnets and adhesives not included); plug the 120V 2-prong power cord into the wall outlet and heat for 10 to 15 minutes.
✅Wide Range of Applications: Two silicone heating pads can be used on the transmission and the engine respectively.
⭐Installations:
--The silicon rubber heater can be used in the wet, non explosive gas environment, industrial equipment, pipelines, tank barrels with heat insulation (oil heater).
Can be used as the auxiliary heating of the refrigeration and air conditioning compressor, motor and other equipment.
Can be used as medical devices (such as blood analyzer, test tube heater, medical care, slimming belt corset heat compensation etc.).
All kinds of automobile fuel tank, water tank, storage battery, anti-freezing heat insulation
⭐Specification:
Material: Alloy wire,Silicone rubber
Color: Orange
Product size:
Heater size: length:13cm width:9cm
Wire length: 213cm
Insulation material the highest resistance temperature: 300 degrees
Power error: 8%
Insulation resistance:≥5 MΩ
Compressive strength: 1500v/5s
Resistance voltage: 6KV
Power:110v 175w
⭐Attention:
1 You can not cut the pad.
2 Do not use batteries.
3 It can not be installed on a plastic or poly container.
⭐Package Included:
1 PC Heater Pad
120W Car Oil Pan Block Heating Hydraulic Tank Heating Plate Sump Heater Sticker
The silicon rubber heater is mainly composed of nickel chromium alloy electric heating wire and high temperature silicon rubber insulation layer. Silicone rubber high temperature insulation layer is made of silicone rubber and glass fiber cloth composite and into a thin sheet (1.5mm), silicone rubber heater has a good flexibility.
⭐Features:
✅Heated Engine: Help you start car quickly. In cold winter, use silicone heating pad to heat the engine and transmission before starting the car, reduce the consistency of the oil to keep the oil as a thin liquid, thus better lubricating the engine and reducing wear and tear, extending the life of the engine and transmission and starting the car quickly.
✅Replaces Block Heaters: Magnets do not work on aluminum oil pan, which is what most cars have. Oil pan heaters are suitable for both cast iron and aluminum engine oil pans.Economical and convenient solution.
✅High Quality Material: Made of high quality silicone, waterproof and oil-proof, the waterproof design of the silicone and power cord connection reduces the risk of short circuit. The hotter the upgraded silicone is the stronger the adhesion. -The insulation layer of the silicone rubber heating plate is composed of silicon rubber and glass fiber cloth, which has high insulation performance and a breakdown voltage of 20 ~ 50KV / mm.
-The double-sided adhesive on the back can be directly attached to the product to be heated. The maximum resistance is 200 ° and it does not fall off.
✅Easy to Install: Clean and dry the flat surface of the device, peel off the paper backing and apply the oil pan heater, using magnets/adhesives can extend the adhesion time (magnets and adhesives not included); plug the 120V 2-prong power cord into the wall outlet and heat for 10 to 15 minutes.
✅Wide Range of Applications: Two silicone heating pads can be used on the transmission and the engine respectively.
⭐Installations:
--The silicon rubber heater can be used in the wet, non explosive gas environment, industrial equipment, pipelines, tank barrels with heat insulation (oil heater).
Can be used as the auxiliary heating of the refrigeration and air conditioning compressor, motor and other equipment.
Can be used as medical devices (such as blood analyzer, test tube heater, medical care, slimming belt corset heat compensation etc.).
All kinds of automobile fuel tank, water tank, storage battery, anti-freezing heat insulation
⭐Specification:
Material: Alloy wire,Silicone rubber
Color: Orange
Product size:
Heater size: length:13cm width:9cm
Wire length: 213cm
Insulation material the highest resistance temperature: 300 degrees
Power error: 8%
Insulation resistance:≥5 MΩ
Compressive strength: 1500v/5s
Resistance voltage: 6KV
Power:110v 175w
⭐Attention:
1 You can not cut the pad.
2 Do not use batteries.
3 It can not be installed on a plastic or poly container.
⭐Package Included:
1 PC Heater Pad
All rights reserved.